Chemical Process Indicators (CPIs) For Monitoring Radiation (Gamma or E-beam) ISO 11140-1 Type 1
Product Description
Our radiation Chemical Process Indicator labels contain no lead or other toxic heavy metals. The Indicators are manufactured to monitor whether radiation conditions were met at the point of application using latex-free pressure sensitive adhesive, The Indicators are designed for use with irradiation doses as low as 10 kGy.
Physical Properties
- Process: Radiation (Gamma or Ebeam)
- Dimensions: 12.5 mm Standard or Bespoke to order
- Packaging: 5,000 Standard Indicators/Roll; Initial Colour: Yellow
- Chemical Indicator: Signal Colour: Red
Indications for Use
Type 1 Process Indicator
- 10 kGy
Instructions for Use
Use an Indicator on each item, pack, peel pouch or tray intended for irradiation exposure. Process packages/items as required. Upon exposure to irradiation, the Indicator will transition from Yellow to Red. The transition colour may vary depending on the load configuration, length and conditions of the dose. A colour transition from Yellow to a shade of Dark Orange/Red provides indication to exposure to radiation. The longer the dose the deeper the signal colour will become. If signal colour is not achieved, this suggests ideal conditions were not met. If the load was not successfully processed, re-process the load using a new Indicator.
The chemical reaction which causes the colour transition is a radiation specific reaction and is irreversible under most conditions. Post exposure storage near pH basic environments such as reagents or cleaning product fumes may cause involuntary reversion from Red back to Yellow/Orange.
See what our clients have to say
21 October 2023.
Good price, easy to remove from the backing but sticks firm on the item it is attached to.
07 October 2023.
All goosd
01 October 2023.
All good
26 September 2023.
Good quality and value
10 September 2023.
Goods were as advertised and arrived on time
06 September 2023.
Exactly as expected - very pleased indeed
14 July 2023.
Arrived incredibly quickly. Exactly as ordered. Pleased with purchase.
13 July 2023.
Perfect top up for our fire alarm testing at work
05 July 2023.
First class comms and product. Will but of again without hesitaion
20 June 2023.
Very fast delivery and no problems.
13 June 2023.
Amazon prime delivery.
11 May 2023.
No issues encountered
29 April 2023.
fast delivery
12 April 2023.
As described, just about everything you need.
21 March 2023.
This seller is very quick to respond to any query with a very high level of customer service . They were also very swift to supply a replacement product when required. I highly recommend using this supplier. I would give 10 stars on here if i could .
25 February 2023.
Excellent service
21 January 2023.
Goods as described
04 January 2023.
Great service, Thanks!
04 January 2023.
Great service!
12 December 2022.
⭐️⭐️⭐️⭐️⭐️
28 November 2022.
very fast and good service
Performance Characteristics
Colours shown are representations of printed ink initial and signal colours but may vary from actual use.
The signal colour from exposure to irradiation may vary from the example above due to differences in processing parameters (i.e. load content, cycle time, dose, etc.). For a Type 1 Process Indicator, a colour change to a shade of Orange/Red produced during exposure to irradiation which is difference from the initial colour is considered acceptable.
Compliance
ISO 11140-1:2014 Sterilization of health care products – Chemical Indicators – Part 1: General requirements for Type 1 Chemical Process Indicators
Storage and Shelf Life
Disposal
Discard as general waste.
"*" indicates required fields
COMMON SECTORS
Looking for Chemical Process Indicators (CPIs) For Monitoring Radiation (Gamma or E-beam) ISO 11140-1 Type 1?
Contact our customer support staff today!